Stedi
STEDI ST3301 Pro 7.5" 4 LED Work Light
STEDI ST3301 Pro 7.5" 4 LED Work Light
Couldn't load pickup availability
*Please note, this product are mostly special ordered. Delivery time can vary between approx 1 to 3 weeks.
*Send us a quick Whatsapp to check if immediately available 0722745134
*Order, payment, sale, refund and returns, Terms and Conditions Apply.
A compact 7.5" work light on the ST3301 Pro platform, built around 4 OSRAM LEDs for a wide 45° flood beam - useful for roadside wildlife detection or as a general auxiliary work light.
Die-cast aluminium construction with a GE Lexan lens and an IP68 rating make it suitable for permanent off-road mounting in dust and water crossings.
Key Features
| Brand | STEDI |
| Model | ST3301 Pro 7.5" 4 LED |
| Lumens (raw) | 3,440 Lm |
| LED Count/Type | 4 x OSRAM |
| Beam Pattern | Flood, 45° beam angle |
| Colour Temperature | 5600K |
| Operating Voltage | 10-45V DC |
| Current Draw | 2.4A @ 13.6V |
| IP Rating | IP68 |
| Weight | 0.840kg |
| Material | Die-cast aluminium housing, GE Lexan lens |
| Mounting | Sliding brackets + stainless steel sides |
Highlights
- Wide flood beam suits close-to-mid range work and area lighting
- Roadside wildlife detection at touring speed
- IP68 rated for reliable operation in dust, rain and water crossings
- Compact size suits bull bar wings, roof rack corners or canopy mounts
- General auxiliary work light for camp, trailer or workshop use
Materials & care
Die-cast aluminium housing with a GE Lexan polycarbonate lens. Rinse off mud and salt after off-road or coastal driving to protect the housing finish and seals over time.
Sizing & fit
Compact 7.5" work light, 0.840kg. Mounts via sliding brackets with stainless steel side hardware.
Compatibility
Part of the STEDI ST3301 Pro platform; HB3/H4 piggy-back adapters are included for wiring into an existing headlight circuit, alongside the supplied relay harness for a dedicated switched circuit.
How to use
- Mount the light using the supplied sliding brackets and stainless steel side hardware at your chosen location.
- Wire in the supplied relay harness with switch for a dedicated, fused circuit, or use the HB3/H4 adapters to tap into an existing headlight connector.
- Aim the beam slightly downward to avoid dazzling oncoming traffic when used on public roads.
- Check mounting bolts periodically for tightness after corrugated or rough terrain driving.
What's included
- 1 x ST3301 Pro 7.5" work light
- 2 x grey side caps
- 2 x orange side caps
- Stainless steel nuts and bolts
- Stainless side brackets
- Male and female Deutsch connectors
Frequently asked questions
|
Share
