• STEDI G4 Marine Work Light
  • STEDI G4 Marine Work Lights
  • STEDI G4 Marine Work Light Hybrid beam
  • STEDI G4 Marine Work Light Flood beam
  • STEDI G4 Marine Work Light Ultra Flood beam
  • STEDI G4 Marine Work Light Dual Colour beam
1 6

Stedi

STEDI G4 Marine Work Lights

STEDI G4 Marine Work Lights

R 2,599.00
R 2,599.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
Beam Type

*Please note, this product are mostly special ordered. Delivery time can vary between approx 1 to 3 weeks.
*Send us a quick Whatsapp to check if immediately available 0722745134
*Order, payment, sale, refund and returns, Terms and Conditions Apply.

The STEDI G4 Marine is the corrosion-resistant, marine-finished version of STEDI's G4 work light, built around the same 4x CREE XP-L2 LEDs (4x10W) engine but finished and hardware-specced for boats, docks and salt-air environments. It's available in Hybrid, Flood, Ultra Flood, Dual Colour (white/red) and Flush Mount versions.

Like the standard G4, it's IP68 and IP69K rated (IP69K on Ultra Flood), so it copes with dust, pressure-washing and submersion - useful whether it's mounted on a boat, a 4x4, or fixed equipment near the coast.

Key Features

LED 4x CREE XP-L2 (4x10W)
Lumens 4,000 raw / 3,000 tested
Colour temperature 5700K white / 620nm red (Dual Colour)
Beam throw @ 1 lux - Hybrid 160m length / 50m width
Beam throw @ 1 lux - Flood / Flush Mount 81m
Beam throw @ 1 lux - Ultra Flood 42m
Beam throw @ 1 lux - Dual Colour 60m (white) / 18m (red)
IP Rating IP68 & IP69K (IP69K on Ultra Flood)
CISPR rating 25 C3
Voltage 12V & 24V
Current draw 3.2A @ 13.5V (standard); 1.6A white / 1.6A red (Dual Colour)
Material Die-cast aluminium housing, polycarbonate lens, stainless steel hardware/bracket, tinned cabling
Lifespan 50,000 hours
Weight 1.0kg (1.002kg Dual Colour)

Highlights

  • Marine-grade stainless steel hardware and tinned cabling for salt-air and coastal use
  • Hybrid, Flood, Ultra Flood, Dual Colour and Flush Mount beam options
  • IP68 & IP69K rated for dust, pressure-washing and submersion
  • Shares the proven G4 LED engine and 50,000-hour lifespan
  • Shock tested at 30G and vibration tested at 5G, CISPR 25 C3 certified
  • Suits boats, docks, trailers and coastal 4x4 use

Materials & care

Die-cast aluminium housing with a polycarbonate lens, stainless steel hardware and bracket, and tinned cabling for corrosion resistance. Rinse with fresh water after salt water exposure to protect fixings and the housing finish long-term.

Sizing & fit

Weighs 1.0kg (1.002kg for the Dual Colour variant), supplied with a stainless steel bracket (Flush Mount version excludes the cover/bracket for its flush install).

How to use

  • Choose the beam pattern that matches the job - Hybrid combines spot and flood, Flood/Ultra Flood suit wide area coverage, Dual Colour adds a switchable red channel.
  • Mount using the supplied stainless steel bracket and hardware, or flush-mount the Flush Mount version directly into a panel.
  • Wire via the 2-pin male connector through a relay and fuse appropriate to your 12V or 24V system.
  • Rinse with fresh water after salt water exposure as part of routine care.

What's included

  • STEDI G4 Marine light
  • White cover (excl. Flush Mount)
  • Stainless steel hardware
  • Stainless steel bracket
  • 2-pin male connector

Frequently asked questions

What makes the G4 Marine different from the standard G4?

The G4 Marine uses stainless steel hardware, a stainless bracket and tinned cabling suited to boats and salt-air environments, while sharing the same 4x CREE XP-L2 LED engine as the standard G4.

Is the G4 Marine submersible?

Yes, it's rated IP68 & IP69K (IP69K on the Ultra Flood beam), so it handles dust, pressure-washing and submersion.

What does the Dual Colour version do?

It gives a switchable white (60m throw) and red (18m throw) beam from the same light, useful for general work lighting plus a lower-glare red mode.
View full details